SPLICING TAPES (Single sided)
Based on Cellulose, Polyester and Paper for many web splicing applications, including Casting Papers.

	Thickness (μ)	Carrier / Adhesive	Peel adhesion* (N/25mm)	Application	Features & Benefits
R524	100	PET film / Silicone	8.75	Butt splicing of siliconised papers and plastic films	Thick adhesive coat weight helps in bonding well to most common siliconised surfaces. Green color enables easy splice identification. Excellent heat, chemicals and shear performance. Operating temperature: -40°C to +180°C (+200°C short term).
R592	83	PET film / Silicone	9.6	Butt splicing of siliconised papers and plastic films	Bonds well to most common siliconised surfaces. Green color enables easy splice identification. Operating temperature: -40°C to +180°C (+200°C short term).
1601	68	PET film / Silicone	7	Butt splicing of siliconised papers and plastic films	Bonds well to most common siliconised surfaces. Blue color enables easy splice identification. Operating temperature: -40°C to +180°C (+200°C short term).
741KG	85	PET film / Silicone	10	Butt splicing of siliconised papers and plastic films	Bonds well to most common siliconised surfaces. Blue color enables easy splice identification. Operating temperature: -40°C to +180°C (+180°C short term).
C1640	60	PET film / Silicone	7	Butt splicing of siliconised papers and plastic films End roll tabbing	Bonds well to most common siliconised surfaces. C1640 features a PVC embossed liner as well as a silicone release on its backing, which ensure the same non-stick properties as the web material (tape and label manufacturing). Excellent heat, chemicals and shear performance. Operating temperature: -40°C to +130°C (+150°C short term). C1640 is transparent.
1650	48	PET film / Silicone	7	Butt splicing of siliconised papers and plastic films	Bonds well to most common siliconised surfaces. Excellent heat resistance. Red color enables easy splice identification. Very thin splicing solution. Excellent heat, chemicals and shear performance. Operating temperature: -40°C to +130°C (+150°C short term).
1695	45	Aluminised PET film / Acrylic	6.5	Butt splicing	Aluminum color backing for easy identification. Very thin splicing solution. Excellent heat, chemicals and shear performance. Operating temperature: -15°C to +130°C.
K125	84	PET film / Acrylic	26.25	Butt splicing, PVC flooring, online repairing	Outstanding tack and adhension to many non-silicone substrates. Can be used in combination with K132. Operating temperature: -40°C to 150°C.
K132	315	Impregnated Paper / Acrylic	17.5	Butt splicing during PVC flooring, manufacturing rough / irregular surfaces	Versatile single-sided tape for splicing at all stages of coating, manufacture and converting. Excellent shear and peel resistance, even at very high temperatures. Operating temperature: -40°C to +200°C (+250°C short term). Backing can be top coated.
K134	209	Impregnated Paper / Acrylic	17.5	Butt splicing during PVC flooring, manufacturing rough / irregular surfaces	Thinner product than K132. Higher tack adhesive while maintaining excellent high temperature shear resistance. Operating temperature: -40°C to +200°C (+250°C short term). Backing can be top coated.
K138	240	Impregnated Paper / Acrylic	17.5 or 8 N/cm	Butt splicing during PVC flooring, Linoleum, manufacturing rough / irregular surfaces	Thinner product than K132. Higher tack adhesive while maintaining excellent high temperature shear resistance. Operating temperature: -40°C to +200°C (+250°C short term). Backing can be top coated.

*Peel adhesion is measured at 180° to the surface on the stainless steel

To challenge the smart card market, we also provides you with a comprehensive range of specialist films to allow high performance and quality bonding, mounting, splicing and masking on a large extend of substrates:

Product	Carrier	Adhesive	Thickness	Temperature (max.° C)	Application	Special Features
1801	Kapton	Silicone	70	-40°C to +180°C	Splicing. High Temperature Masking Lead Frame Splicing.	Excellent heat and chemical resistance High shear strength Leaves no residue after removal Can be used in short term up to 280°C
C556	Polyimide	Silicone	65	-40°C to +180°C	Splicing. High Temperature Masking Lead Frame Splicing.	Excellent heat and chemical resistance High shear strength Leaves no residue after removal Can be used in short term up to 280°C
C524	PET	Silicone	100	-40°C to +180°C	Butt Splicing of Siliconised papers and plastic films	Thick adhesive coat weight helps bonding well to most siliconised surfaces Green colour enables easy splice identification Excellent heat and chemical resistance High shear strength
1504H	Glass Cloth	Silicone	170	-40°C to +180°C	Multipurpose Bobbin closing	Glass cloth substrate provides very good conformability High mechanical and chemical resistance
C1640	PET	Silicone	60	-40°C to +150°C	Butt splicing of siliconised papers and plastic films	Bonds well to most siliconised surfaces Product construction with embossed PVC liner and silicone release on its backing ensures identical non-sticky properties to the web material (tape and label manufacturing)
1695	Aluminised PET	Acrylic	45	-15°C to +130°C	Butt splicing	Easy to use Leaves no residue after removal Good shear resistance High chemical, moisture and solvent resistance
S159RW	Double Sided PET	Removable Acrylic / Permanent Acrylic	76	-15°C to +120°C	Temporary mounting Temporary labels Label and card bonding onto paper for mailings	Ultra removable acrylic adhesive exhibits very low peel, easy and clean removal

SPLICING TAPES (Double sided Transfer Tapes)

For overlap splicing refered to Double Sided Tapes

SPLICING TAPES (Double sided Splicing Tapes)

For overlap splicing refered to Double Sided Splicing Tapes

---

Contact us by phone e-mail for any adhesive tape requirement

Web: www.printernational.co.uk ~ Tel: +44 (0)20 8050 8069 ~ E-mail: pr@printernational.co.uk