PR INTERNATIONAL
E-mail here E-Mail Web Address English Deutsch Spanish Czech Mandarin
2702 PVC Electrical Adhesive Tape


  • 2702 is a 0.13mm premium quality, electrical self-extinguishing soft PVC tape that uses an aggressive pressure sensitive rubber-based adhesive system. It has been designed for use where a recognised specification or international standard is required and where environmental safety is a concern.

APPLICATIONS
  • Primary electrical insulation
  • Protection for low and medium voltage cable splices
  • Colour coding
  • Industrial applications
  • Used for electrical cables wrapping in automotive application
  • Hand application


  • PRODUCT BENEFITS
  • Good resistance to abrasion, corrosion and moisture
  • Service temperature 0 °C to +110 °C
  • High dielectric strength and good mechanical protection
  • Outstanding conformability
  • Environmentally friendly technology
  • Approved by IMQ, VDE, ÖVE
  • Conforms to BS3924
  • Conforms to European Directive 2000/53 EC (lead, chromium VI, mercury, cadmium free)
  • TECHNICAL PROPERTIES Unit Nominal Value
    Thickness mm 0.13
    Tensile Strength N/cm 25
    Elongation at Break % 180
    Adhesion to Steel N/cm 1.8
    Adhesion to Backing N/cm 1.8
    Dielectric Strength KV/mm 40
    Flammability --- Self extinguishing


    STANDARD PRESENTATION
  • Roll length : 10, 20, 25 and 33 metres
  • Roll width : 12, 15, 19 and 25mm
  • Core : 32 mm Scapa branded cardboard core
  • Packaging : Cellowrapped with Scapa label and bar code
  • Colours : Black, White, Grey, Red, Blue, Yellow, Dark green, Light Green, Brown, Orange, Violet, Transparent, Yellow/green


  • RECOMMENDATIONS

    Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. The storage temperature should be between +10°c and +25°c. Use within 24 months of receipt.

    The tape should be applied with sufficient tension to ensure an optimum bonding and a minimum of two layers with a half overlap. The final layer should be wrapped with a lower tension to prevent flagging effects.

    Surfaces should be clean, dry and free of dust, grease, oil or other contaminants..



    Contact us by phone, fax, e-mail or , for any adhesive tape requirement

    Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk