PR INTERNATIONAL
E-mail here E-Mail Web Address English Deutsch Spanish Czech Mandarin
2258 UPVC Lithographic Adhesive Tape


  • 2258 is a red tinted u-PVC film single coated with a solvent based rubber/resin adhesive with 57µ total thickness. Recommended for edging, masking, stripping and splicing applications.

APPLICATIONS
  • Designed for stripping up lithographic negative films prior to plate making.
  • Ruby red colour allows an accurate positioning of the tape.
  • Opaque to ultra violet, it can be used in conjunction with orthochromatic films, plates and papers.


  • PRODUCT BENEFITS
  • Optically transparent and photographically opaque.
  • Better resistance to changing atmospheric conditions than cellulose based lithographic tapes.
  • Red colour enables easy identification.
  • Service temperature: -10°C to +60°C
  • TECHNICAL PROPERTIES Unit Nominal Value
    Thickness mm 0.057
    Tensile Strength N/cm 60
    Elongation at Break % 60
    Adhesion to Steel N/cm 2.0


    STANDARD PRESENTATION
  • Roll length : 66 metres
  • Roll width : 12mm, 15mm, 19mm, 25mm, 38mm, 50mm
  • Core : 76 mm Cardboard core
  • Packaging : Sleeve pack (for 12 to 25mm) - Bags (38 and 50mm)
  • Colour : Red


  • RECOMMENDATIONS

    Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature between +10 °C and 30 °C. Under these conditions, the storage life of the tape in a temperate climate will be at least one year. Surfaces should be clean, dry and free of dust, grease, oil or other contaminants.


    Contact us by phone, fax, e-mail or , for any adhesive tape requirement

    Web: www.printernational.co.uk ~ Sitemap ~ Tel: +44 (0)1923 270508 ~ Fax: +44 (0)1923 269134 ~ E-mail: pr@printernational.co.uk