Home
Solutions for:
Synthetic Leather
Graphic Tapes
Printers Tapes
Double Sided Tape
Foam Tapes
Sealants
Polyethylene Tape
Electrical Tapes
Masking Tapes
Self Amalgamating
Splicing Tapes
Cloth Tapes
Packaging Tapes
Special Purpose
PR INTERNATIONAL
Mandarin Czech Spanish Deutsch English
E-mail here
E-mail here E-Mail
1140 Cellulose Lithographic Adhesive Tape


  • 1140 is a transparent cellulose film single coated with a blue tinted solvent based rubber/resin adhesive with 45µ total thickness. Recommended for edging, masking, stripping and splicing applications.

APPLICATIONS
  • Designed for stripping up lithographic positive films.
  • Does not affect the transmission of light through the tape.
  • Not suitable for use in conditions of high humidity.


  • PRODUCT BENEFITS
  • Anti-static
  • Biodegradable
  • Hand tearable
  • Blue colour enables easy identification.
  • Service temperature: -10°C to +100°C (up to 130°C for short period)
  • TECHNICAL PROPERTIES Unit Nominal Value
    Total Thickness mm 0.045
    Tensile Strength N/cm 36
    Elongation at Break % 20
    Adhesion to Steel N/cm 2.2


    STANDARD PRESENTATION
  • Roll length : 66 metres
  • Roll width : 12mm, 15mm, 19mm, 25mm, 38mm
  • Core : 76 mm Cardboard core
  • Packaging : Sleeve pack
  • Colour : Blue


  • RECOMMENDATIONS

    Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Cellulose based products are sensitive to heat, moisture and storage conditions. When stored in their original carton at recommended conditions of +23°C and 50 % humidity, the best usage date will be within 6 months from the date of shipment. Surfaces should be clean, dry and free of dust, grease, oil or other contaminants.


    Contact us by phone e-mail for any adhesive tape requirement

    Web: www.printernational.co.uk ~ Tel: +44 (0)20 8050 8069 ~ E-mail: pr@printernational.co.uk