Adhesive Tapes - 1129 Cellulose Lithographic Adhesive Tape - PR International Ltd

1129 Cellulose Lithographic Adhesive Tape - DISCONTINUED
Replaced with 637 Splicing and Sheathing Tape Red, 2.6 mils

1129 is a dark red dyed release coated cellulose film single coated with a solvent based rubber/resin adhesive with 45µ total thickness. Recommended for edging, masking, stripping and splicing applications.

APPLICATIONS

Suitable for the printing and graphic industry, for photographic films.

Protects orthochromatic films, contact and enlarging papers, printing plates during light exposure.

Ruby red colour allows an accurate positioning of the tape on stored films.

Not suitable for use in conditions of high humidity. In that case refer to 2258.

PRODUCT BENEFITS

Anti-static

Biodegradable

Clean removal from photographic films

Easy unwind for users

Hand tearable

Optically transparent and photographically opaque

Red colour enables easy identification

Service temperature: -10°C to +100°C (up to 130°C for short period)

TECHNICAL PROPERTIES Unit	Nominal Value
Thickness mm	0.045
Tensile Strength N/cm	40
Elongation at Break %	23
Adhesion to Steel N/cm	2.2

STANDARD PRESENTATION

Roll length : 66 metres

Roll width : 12mm, 15mm, 19mm, 25mm, 38mm, 50mm

Core : 76 mm Cardboard core

Packaging : Sleeve pack (for 12 to 25mm) - Bags (38 and 50mm)

Colour : Dark Red

RECOMMENDATIONS

Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Cellulose based products are sensitive to heat, moisture and storage conditions. When stored in their original carton at recommended conditions of +23°C and 50 % humidity, the best usage date will be within 6 months from the date of shipment. Surfaces should be clean, dry and free of dust, grease, oil or other contaminants.