75

120

130

100

100

120

Heavy duty splicing
Used where a greater adhesive mass is required.
Modified acrylic for better adhesion onto low energy surfaces.
Operating temperature: -40° C to +110° C.

Similar use to 4493
Same as 4493 but in reverse wound format.
Tape gun version of 4493.

White PVC Filmic Tape, Solvent Acrylic Adhesive, Amber Liner

Overlap splicing, roll closing
Transfer film with high performance solvent acrylic adhesive.
Operating temperature: -20°C to +120°C.

High Performance Tissue, Solvent Acrylic Adhesive, Moisture Stable Liner

Overlap splicing, roll closing
Transfer film with high performance solvent acrylic adhesive.
Operating temperature: -40°C to +140°C (+200°C short term).

Overlap splicing, roll closing
Transfer film with high adhesion acrylic adhesive.
Operating temperature: -40°C to +150°C (+200°C short term).

Double Sided Polyester Film Tape

Overlap splicing, roll closing
Transfer film with high performance solvent acrylic adhesive.
Operating temperature: -20°C to +170°C (+200°C short term).

General purpose overlap splicing of paper and plastics
Transfer film with acrylic adhesive.
Good heat and solvent resistance.
Operating temperature: -40°C to +150°C (+200°C short term).

£3.60 per roll
12mm x 33m
72 Rolls per Case
> 1 case
Including Delivery + VAT
in stock

Tape width/Liner width: 6/12mm, 12/18mm, 24/30mm
Length: up to 2000m in flat rolls and 6000m plus as bobbins

Features: Supplied with a permanent adhesive, this product is used in the manufacturer of continuous stationery/business forms, and for the flaps of envelopes to make them self-adhesive. Being a thicker tape it is ideal for difficult surfaces. The tape can be supplied in flat rolls up to 1500m long and in bobbins (spools) of up to 6000m.

Features: Can be supplied in flat rolls or Spooled Bobbins. Typical dimensions (liner/tape widths in mm) 6/12, 12/18, 18/24, 24/30.A tape based on a permanent adhesive. Same applications as for 2065/2665, but the tape is thinner, which keeps continuous stationary less bulky. Can be supplied in flat rolls of up to 2000m or in longer bobbins.

Features: The same as 2034/2634, but supplied with a plastic liner for application to plastic bags (to make them self-seal), with the advantage that during bag manufacture a hot wire can cut through both the plastic bag and the tape at the same time.

Features: Pressure Sensitive Hot Melt / Rubber Resin

Features: Pressure Sensitive EPDM Resistant Grade Hot Melt Adhesive

Features: A double sided self-adhesive cloth based tape which is flame resistant and self-extinguishing, supplied on a siliconised paper liner.For fixing carpets inside aircrafts which require the above properties.
Flame resistance: burn length: 120mm, extinction time: 3 seconds, no dripping.
As per FAR-25853-part 25-Change 25-35.
Adhesion tested according to: BOEING 5-133A
Flexible and easy tear, no adhesion residue after removal