5169 is a general-purpose, hard double-sided foam bonding tape. The product is black. The foam is predominantly closed celled. An acrylic pressure sensitive adhesive is coated on both sides, and the product has a paper release liner. The material can be supplied with a film liner facilitating automatic application.
The material can be supplied with a film liner facilitating automatic application.
Life expectancy will vary with temperature and humidity.
APPLICATIONS
For general mounting / bonding
For automotive mirror mounting
For glazing
Forms a compression water seal
For preventing electrolytic corrosion
PRODUCT BENEFITS
Maximum Recommended Weight Loading of 7 g/cm2
Service temperature -40 °C to +70 °C
Application temperature: +10 °C to + 40 °C
Shelf life of 1 year from date of despatch
Minimum 20% compression required to effect a water seal
Coated on both sides with a high quality pressure sensitive acrylic adhesive
Good resistance to dilute acids & alkalis
Paper release liner, reducing dimensional change during application
Very good Ultra violet {UV} Light resistant
Resistance to abrasion, corrosion and moisture
Suitable for indoor and outdoor environments
No known hazards associated with this product
Pre-determined dimensional sealant reduces waste
Clean to use
TECHNICAL PROPERTIES Unit
Nominal Value
10 Minute 180 ° Peel Adhesion
N/25mm
10
500 Hour static shear {stainless steel}
Kg/cm-2
0.15
Dynamic Tensile Adhesion
N/cm-2
45
Tensile Strength
N/cm-2
110
Elongation At Break
%
220
Foam Density
Kg/m-3
270
STANDARD PRESENTATION
Formats : Logs, Rolls, Die Cuts, Spools
Thickness : 0.8, 1.5, 2.0, 3.0, 4.5 & 6.0 mm
Core : 76mm plastic core
RECOMMENDATIONS
Surfaces must be clean, dry, free from grease and dirt.
Recommended cleaning agent is Propan-2-ol, {IPA}. Please note manufacturers safety instructions should be
followed and customers are recommended to ensure compatibility of the solvent with their substrate.
Low temperatures may increase the risk of condensation, reducing the tack of the product.
Life expectancy will vary with temperature and humidity.
Product may be applied by hand direct from a roll applying even pressure.
Customers are recommended to make their own assessment of our products under their own conditions, for
their own requirements.
