3120 is a medium performance, strong, polyethylene coated 70mesh, waterproof cloth tape, coated with a pressure sensitive adhesive. 3120 is available in a full range of colours including black, white, silver, red, yellow, blue and green.
APPLICATIONS
Duct sealing - covering joints in hot air and insulating material
Fixing and holding of wires and cables, especially on film sets
Heavy duty and export packaging for drum sealing and colour coding
Double glazing unit sealing
Masking applications
Carpet joining and edging
Colour coding and identification
Military use on ammunition cartridges
Joining and splicing applications
Ideal for general purpose applications where added strength and performance required
PRODUCT BENEFITS
Excellent waterproof properties
Good strength
Highly flexible and conformable
Good initial tack and ultimate adhesion
Good unwind
Easy tear
Peels off easily after use
Low and high temperature performance
Good all round performance Service Temperature -20 °C to 80 °C
Exceed the technical requirements of PPP-T-60 TY.4 CL.1 / ASTM D TYPE IV, if advised on ordering.
TECHNICAL PROPERTIES Unit
Nominal Value
Thickness
mm
0.26
Tensile Strength
N/cm
48
Adhesion to Steel
N/cm
4
Adhesion to Backing
N/cm
2.5
STANDARD PRESENTATION
Roll length : 25 metres, 50 metres
Roll width : 19mm, 25mm, 38mm, 50mm, 75mm, 100mm
Core : Cardboard core
Packaging : bulk packed using interleaving sheets between layers. Note: Information on stock items, non-standard sizes, and lead times is available on request.
RECOMMENDATIONS
Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from
dust, heat, moisture, direct sunlight and solvent fumes. Service life will vary with conditions of use and is affected by climatic environment, but should not be less than two years from date of manufacture, if stored in a moderate climate and good conditions.Usage is recommended within one year.
Contact
us by phonee-mail for any adhesive tape requirement
