1253 is a crystal clear BOPP 28µm bi axially oriented polypropylene film, coated with a solvent free acrylic system (water based acrylic adhesive system), with 47µm total thickness and recommended for general packaging and gift wrapping. 1249 is now replaced with 1253 as alternative product, only in 25mmx66m and 50mmx100m.
1253 is a crystal clear tape with a total thickness of 48μm, consisting of a 28 μm crystal clear Polypropylene BOPP film, coated with a solvent based acrylic adhesive. It is recommended for gift wrapping, sealing and packaging, suitable for a variety of case taping machines, domestic packaging and sealing applications at home, at school or in the office.
The rolls should be stored flat on their cut edges in the original packaging. The product must be protected from dust, heat, moisture, direct sunlight and solvent fumes. Storage temperature between +18℃ and +30℃. Under these conditions, the storage life of the tape in a temperate climate will be at least one year. Surfaces should be clean, dry and free of dust, grease, oil or other contaminants.
Graphic Tape Features
Clear Polypropylene film with non-oozing acrylic adhesive. Suitable for edge mounting film postives. Used in Motion Pictures for splicing film works.Optically clear cinema splicing tape of excellent durability that will not discolour or lose adhesion with age. It is chemically resistant to oils, solvents and grease. Moisture-proof and abrasion resistant. Used for splicing 8mm, Super 8mm, 9.5mm, 16mm, 35mm and 70mm film (VistVision) .Also suitable for a variety of domestic packaging and sealing applications at home, at school or in the office.
Crystal clear transparency
* Clean removal from photographic films
* Easy unwind.
* Good chemical resistance
* Moisture resistant
* Plasticiser resistant
* UV resistant
* Hight tack
* Service temperature: -15 ℃ to 110 ℃
* Can be used with the Neutaper / Neumade Splicer
Test Method : Afera 4006, 4004,4005,4001 HS Tariff No : 39.19.10.69
APPLICATIONS
Suitable for the printing and graphic industry, for photographic films.
Protects orthochromatic films, contact and enlarging papers, printing plates during light exposure.
Overlay film for instructions, leaflets etc.
Laminating film of label web for high speed die cutting.
Suitable for a variety of domestic packaging and sealing applications at home, at school or in the
office.
Suitable for a variety of domestic packaging and sealing applications at home, at school or in the
office.
Bag sealing.
Box sealing.
Bundling
PRODUCT BENEFITS
Anti-static
Biodegradable
Clean removal from photographic films
Easy unwind for users
High tack.
Low noise.
Mositure and chemical resistant.
Applicable by hand.
Optically transparent and photographically opaque
Excellent transparency
Continuous temperature: +60°C
Service temperature: -15°C to +110°C (up to 130°C for short period)
TECHNICAL PROPERTIES Unit
Nominal Value
Thickness
mm
0.047
Tensile Strength
N/cm
42
Elongation at Break
%
140
Adhesion to Steel
N/cm
2.6
STANDARD PRESENTATION
Roll length : 66 metres, 100 metres and 132 metres
Roll width : 50mm,
Core : Cardboard core 76mm
Packing : Flat shrink pack
Colour : Buff, Transparent Clear and White
RECOMMENDATIONS
Rolls should be stored flat on their cut edges in the original packaging. The product must be protected from
dust, heat, moisture, direct sunlight and solvent fumes. When stored in their original carton at recommended conditions of +18°C and 30°C, the storage life of the tape in a temperature climate will beat least one year.
Contact
us by phonee-mail for any adhesive tape requirement
PP Clear 1253
Graphic Tape Features
Crystal clear transparency